T4000 V2 Eccentric Polishing Machine 15mm HUB

Liquid Elements T4000 V2 Eccentric Polishing Machine 15mm HUB

The Liquid Elements T4000 V2 eccentric polishing machine is suitable for everyone with 15mm eccentric HUB, the standard mounted 125mm support plate and a power of 950 watts. Due to the high motor power, the free-rotating rotation of the support plate does not stop even with slight tilts on round surfaces.

Whether absolute newcomer to vehicle preparation or professional - conditioner, this machine is something for every user.

With the modern design of the eccentric polishing machine, particularly pleasant feel, as well as robust and smooth-running electronics, the T4000 V2 stands out in particular. The two LEDs on the top of the polishing machine indicate the correct pressure range during the polishing process. If the green LED bulb is sufficient, the red LED bulb lights up, the pressure on the surface must be reduced.

The following changes and improvements have been made to the previous model:

- more powerful motor with corresponding gear ratio for an output of up to 950 watts

- Torque control display via green and red LED

- increased smoothness

- ergonomic palmrest on the head of the polishing machine with extended rubber coating

- Design customization

specifications

- Voltage: 230V~

- Frequency: 50Hz

- Power consumption: 950 watts

- Lifting speed: 2000-5000 min -1

- Disc diameter: max. 125mm

- Spindle size 5/16" -24

- Weight: 2.7kg

- Lpa (sound pressure): 84dB (A)

- Lwa (Sound Power): 95dB (A)

- Cable length: 8 meters

properties

- 950 watts of power

- 15mm eccentric mechanics

- Low vibration

- Speed constant with remote electronics

- Torque control display via green and red LED

- Not for use with 75mm backing plate

Carbons

The pre-assembled carbon brushes (1 pair) in the machine have an average service life of about 350 hours of pure service life, which corresponds to a reconditioning of about 50 vehicles. This requires the correct handling and use of the machine during the polishing process, as the service life of the carbon brushes can otherwise vary greatly.
Note: Replacement carbon brushes are always included with the machine as standard, so 2 pairs of carbon brushes are available in the delivery.

scope of delivery

- Already mounted 125mm support plate

- Liquid Elements storage bag

- Replacement carbon brushes

- Allen key

- Instruction manual