Delivery time appr. 1-2 workdays
T4000 V2 - Orbital Polishing Machine
Technical Specifications
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power Consumption | 950 Watts |
| Stroke Speed | 2000 - 5000 min -1 |
| Disc Diameter | Max. 125 mm |
| Spindle Size | 5/16" -24 |
| Weight | 2.7 kg |
| Lpa (Sound Pressure) | 84 dB |
| Lwa (Sound Power) | 95 dB |
| Cable Length | 8 Meters |
| WEEE Reg. No. | DE 64199561 |
Features
- 15 mm Orbital Mechanism
- Low Vibration
- Speed Control with Remote Electronics
- No Support for Operation with a 75 mm Support Plate
The T4000 V2 Orbital Polishing Machine is suitable for everyone with 15mm orbital stroke, the standard mounted 125mm support plate and a power of 950 watts. Due to the high motor power, the free-running rotation of the support plate does not stop even when lightly tilted on round surfaces.
Whether a complete beginner in vehicle preparation or a professional preparer, this machine is something for every user.
With the modern design of the orbital polishing machine, particularly pleasant haptics, as well as a robust and smooth-running electronics, the T4000 V2 stands out in particular. The two LED lights on the top of the polishing machine indicate the correct pressure range during the polishing process. If the green LED bulb lights up, the pressure is sufficient, if the red LED bulb lights up, the pressure must be reduced on the surface.
Carbon Brushes
The pre-mounted carbon brushes (1 pair) in the machine have an average life of approximately 350 hours of pure usage.
This corresponds to a preparation of approx. 50 vehicles.
It is assumed here that the machine is handled and used correctly during the polishing process, as the life of the carbon brushes can otherwise vary greatly.
Scope of Delivery
- 125 mm Support Plate (pre-mounted)
- Storage Bag
- Replacement Carbon Brushes
- Allen Key
- Operating Instructions
