T4000 V2 - Eccentric Polishing Machine
Technical Data
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power Consumption | 950 Watts |
| Stroke Speed | 2000 - 5000 min -1 |
| Disc Diameter | Max. 125 mm |
| Spindle Size | 5/16" -24 |
| Weight | 2.7 kg |
| Lpa (Sound Pressure) | 84 dB |
| Lwa (Sound Power) | 95 dB |
| Cable Length | 8 Meters |
| WEEE Reg. No. | DE 64199561 |
Features
- 15 mm Eccentric Mechanism
- Low Vibration
- Speed Constant Holding with Remote Electronics
- No Support for Operation with a 75 mm Support Plate
The T4000 V2 Eccentric Polishing Machine is suitable for everyone with its 15mm eccentric stroke, the standardly mounted 125mm support plate and a power of 950 watts. Due to the high motor power, the free-running rotation of the support plate does not stop even when lightly skewed on round surfaces.
Whether an absolute beginner in vehicle preparation or a professional preparer, this machine is something for everyone.
The modern design of the eccentric polishing machine, particularly pleasant haptics, as well as a robust and smooth-running electronics make the T4000 V2 stand out. The two LED lights on the top of the polishing machine indicate the correct pressure range during the polishing process. If the green LED bulb is lit, the pressure is sufficient, if the red LED bulb is lit, the pressure must be reduced on the surface.
Carbon Brushes
The pre-mounted carbon brushes (1 pair) in the machine have an average service life of approximately 350 hours of pure usage.
This corresponds to a preparation of about 50 vehicles.
It is assumed here that the machine is handled and used correctly during the polishing process, as the service life of the carbon brushes can otherwise vary greatly.
Scope of Delivery
- 125 mm Support Plate (pre-mounted)
- Storage Bag
- Replacement Carbon Brushes
- Allen Key
- Operating Instructions
